Plant and Equipment Due Diligence When Buying a Trades Business in Australia
Plant and equipment due diligence is the process of independently verifying the age, condition, ownership, and replacement cost of every physical asset included in a business sale. For trades businesses in Australia — plumbing, electrical, HVAC, concreting, landscaping, roofing — it's one of the most consequential parts of the whole process, because equipment is often the largest tangible asset you're buying and the first thing that fails after settlement.
The financial statements tell you what the seller paid for the equipment. They don't tell you what it's actually worth, what it costs to run, or how long it's got left in it. That gap is your problem if you don't close it before you sign.
This is covered in depth in Module 5 of the Playbook.
Why Equipment Condition Matters More Than the Balance Sheet
The typical trades business for sale in Australia lists plant and equipment at book value — the depreciated figure after the accountant has applied tax depreciation rates over the years. The problem is that tax depreciation and economic reality are two different things.
A five-year-old diesel compressor might be fully depreciated on the books. It might also be running perfectly fine and have another eight years in it. Or it might have a cracked housing, an oil leak, and about six months before it needs a $15,000 rebuild. The balance sheet doesn't distinguish between those two outcomes.
I saw a deal last year where a buyer discovered three days before settlement that the excavator included in the sale had a seized slewing ring — repair quote was $28,000. The seller had depreciated it to zero but was still including it as a "working asset" in the sale. The buyer's mechanic caught it in a pre-settlement inspection; the buyer renegotiated $18,000 off the price. The other $10,000 was goodwill for the relationship (which is generous, frankly).
When you're buying a trades business, the key questions for any piece of equipment are:
- What is its actual market value if you had to sell it tomorrow?
- What is its remaining useful life under normal operating conditions?
- What is the cost to maintain or replace it in the next two years?
- Is it owned outright, or is there finance secured against it?
What Counts as Plant and Equipment
For the purposes of due diligence, plant and equipment in a trades business includes:
- Motor vehicles (utes, vans, trailers, trucks)
- Plant machinery (excavators, booms, compressors, generators)
- Specialised tools (diagnostic equipment, pipe cameras, laser levels, testing rigs)
- Workshop equipment (workbenches, hoists, storage racking)
- IT and communications hardware (tablets, GPS trackers, scheduling screens)
- Mobile equipment attached to vehicles (service bodies, crane trucks, tipper trays)
Don't overlook the small stuff. A plumbing business's pipe camera costs $8,000 to $20,000 to replace. An electrical business's test and tag equipment, wiring testers, and thermal imaging camera add up fast. A landscaping business with a fleet of mowers, blowers, hedge trimmers, and trailers has more in small tools than most buyers realise until they price it out.
How to Assess Equipment Age and Replacement Cost
The starting point is getting a proper asset register from the seller — a spreadsheet listing every piece of equipment, its make, model, year, registration or serial number, and the book value. If the seller doesn't have one (and some don't, which is information in itself), you build it yourself from the financial statements, vehicle registrations, and a physical walkthrough of the premises.
Once you have the register, you verify it. For vehicles, run a PPSR search on every registration to check for encumbrances — finance charges that follow the vehicle, not the business. This is non-negotiable. A $60,000 ute with $45,000 of chattel mortgage against it is not the asset you think you're buying.
For machinery and specialised equipment, get an independent equipment valuer or a trusted tradesperson to assess condition. Not the seller's mechanic. Not the seller's mate. Someone you found yourself or that your own accountant or broker recommended. The cost of an independent equipment inspection is usually $500 to $2,000 and is one of the highest-return investments in the whole due diligence process.
Ask specifically:
- What is the fair market value of each major item?
- What is the expected remaining life?
- What major maintenance is due in the next 12 months?
- Are there any known defects, recalls, or compliance issues?
When you have the answers, compare the total equipment value against what the seller has included in the asking price — and model the capital expenditure replacement schedule for the next three years. If you're buying a roofing business and two of the three utes are due for replacement within 18 months, that's $80,000 to $120,000 of real cost that needs to factor into your offer.
Finance and Lease Obligations on Equipment
This is where a lot of buyers get caught. Equipment in a trades business is frequently financed — chattel mortgage, equipment lease, novated lease, finance lease, or hire purchase. The seller might not even know the difference between these structures, but you need to, because each has a different impact on what happens at settlement.
Run a PPSR (Personal Property Securities Register) search on the business name and on each individual piece of equipment by serial number. This tells you what finance charges are registered and by whom. You're looking for:
- Chattel mortgages or commercial hire purchase agreements secured against equipment
- Lease obligations that must be novated (transferred) to the buyer at settlement
- Any all-asset charges registered by the business's bank (these are common and catch buyers off guard)
The EBITDA add-backs a seller presents often include lease payments stripped out of the profit figure — meaning the "profit" number assumes the lease continues. If you're not aware of that, you might inherit the lease and discover it's at above-market rates or tied to a vehicle that suits the previous owner's workflow, not yours.
Equipment under finance complicates settlement logistics too. Chattel mortgages need to be paid out at settlement or novated with lender consent. Finance leases often can't be transferred at all — the seller has to payout and you reborrow. Get your solicitor and accountant involved early if the equipment schedule has significant finance attached.
Vehicle Fleet Due Diligence
For most trades businesses, the vehicle fleet is the largest single component of plant and equipment. A five-van plumbing business might have $200,000 to $350,000 of vehicles on the road. Here's what to check:
Registration and roadworthy: Confirm every vehicle is registered and has a current roadworthy (where required in your state). Some sellers let registrations lapse on vehicles they're not currently using — those vehicles come to you unregistered.
PPSR check: As above — run searches on every rego. It takes ten minutes and $3 per search.
Service history: Ask for service logbooks or workshop records for each vehicle. Gaps in service history on high-kilometre vehicles are a red flag. A work ute running 50,000 to 80,000 km per year with no service records is a problem.
Age and kilometre analysis: Build a replacement schedule. Industry rule of thumb for light commercial work vehicles is 250,000 to 350,000 km or five to seven years, whichever comes first. If the fleet is approaching these thresholds across the board, you're not buying a fleet — you're buying a fleet replacement program.
Insurance history: Ask the seller if any vehicles have been in accidents, written off, or repaired under insurance. A rebuilt write-off might still be on the road but is worth considerably less than an equivalent clean-history vehicle.
Maintenance Records and Red Flags
Maintenance records tell you two things: how the business has cared for its assets, and what problems it's already dealt with (or avoided dealing with). A business with detailed service logs, signed off by a workshop or licensed mechanic, is run with more discipline than one where "it just gets taken in when something goes wrong."
Red flags in plant and equipment due diligence for a trades business:
- Equipment listed on the asset register that can't be physically located during the walkthrough
- Finance registered on equipment the seller says is owned outright
- Maintenance records that stop well before the current date (or never existed)
- Equipment that has been repaired in-house rather than by licensed workshops (especially lifting equipment, pressure vessels, or vehicles)
- Any equipment subject to mandatory compliance certification that is overdue or has lapsed (forklifts, EWPs, pressure vessels, cranes)
The last one catches buyers in the building and construction trades regularly. Elevated work platforms and forklifts require periodic certification. Pressure vessels need regular inspection by a licensed inspector. If those certifications have lapsed, you inherit the liability — and the cost to bring them back into compliance.
How Equipment Findings Flow Into Price Negotiations
Equipment issues discovered in due diligence are one of the cleaner price adjustment conversations you'll have with a seller, because the numbers are relatively objective. You've got quotes, PPSR search results, equipment valuations. It's harder to argue with "this ute has $32,000 of chattel mortgage against it and your price assumed it was unencumbered" than it is to argue about goodwill.
The usual approach is to quantify the total equipment issues — encumbered assets, replacement costs within 12 months, compliance costs — and present them as a package price adjustment rather than a line-item argument. One clear document, one clear ask. Sellers who have done the general due diligence process before know this conversation is coming; the ones who haven't are usually surprised.
For more on renegotiating after due diligence findings, the operational due diligence article covers the broader conversation.
What to Watch for With Old Plant in Trades Businesses
One area that catches buyers by surprise is environmental and compliance obligations that attach to old equipment. In the plumbing and refrigeration trades, equipment used to handle refrigerants requires ARC-certified technicians and gas handling equipment that must be maintained and tested. In the electrical trade, insulation resistance testers and loop testers need periodic calibration. In concreting and civil works, diesel plant above certain size thresholds requires National Heavy Vehicle Regulator compliance.
None of these are deal-breakers if you know about them. All of them are expensive surprises if you don't.
For environmental obligations specifically — particularly for businesses that handle chemicals, solvents, or refrigerants — see the WHS due diligence guide for the related regulatory requirements.
The Free Checklist
Want the full trades business assessment framework including plant and equipment items? Grab the free trades business assessment checklist — it walks through every category of a trades business inspection including equipment, vehicles, compliance, and staff.
There's also a broader due diligence checklist covering financial, legal, and operational areas.
FAQ
What is plant and equipment due diligence when buying a business?
It's the process of independently verifying the age, condition, ownership, and real value of every physical asset included in the sale — vehicles, machinery, tools, and workshop equipment. The goal is to know what you're actually getting versus what's on the balance sheet.
Do I need an independent equipment valuer when buying a trades business?
For major items — excavators, specialised plant, vehicle fleets over five units — yes. An independent valuer costs $500 to $2,000 and frequently identifies issues worth multiples of that in price adjustments or avoided surprises post-settlement.
What is a PPSR search and why does it matter?
The Personal Property Securities Register is a national database of security interests in personal property, including business equipment and vehicles. Running a search tells you whether the seller has finance secured against the assets they're selling you. A vehicle or piece of machinery with an undisclosed encumbrance transfers the finance obligation to the buyer if it's not cleared at settlement.
What are red flags in equipment due diligence for a trades business?
Significant red flags include: equipment listed on the register that can't be found during a physical inspection; PPSR results showing encumbrances the seller didn't disclose; maintenance records with large gaps; compliance certifications that have lapsed on lifting equipment or pressure vessels; and vehicles with service histories that don't match their kilometres.
How does equipment condition affect the price I pay?
Equipment in poor condition, near its replacement threshold, or with finance attached reduces the net asset value you're actually buying. These findings are usually quantified and presented as a price adjustment request after due diligence — either a reduction in the purchase price or a price-hold subject to the seller clearing the finance before settlement.
For more on what to look for across the full due diligence process, read the financial red flags guide and the broader due diligence checklist for small businesses in Australia.
Want more like this? Subscribe to The Leveraged Worker — a newsletter for Australian professionals buying and running blue-collar businesses.